In 2023, the technology has advanced leaps and bounds, but the basics of using a stylus remains the same. If you have a stylus that needs a new cantilever, it’s important to know how to replace it properly. This article will give you a step-by-step guide on how to replace the cantilever on your stylus in 2023.
Step 1: Gather Your Tools
Before you start, you’ll need to gather the appropriate tools. You’ll need a Phillips screwdriver, a pair of needle-nose pliers, and a small flat-head screwdriver. Make sure that all of your tools are in good condition and suitable for the job. Once you have your tools ready, you can begin.
Step 2: Remove the Old Cantilever
The first step is to remove the old cantilever. Take the Phillips screwdriver and unscrew the screws on the back of the stylus. Once the screws are removed, you can gently lift the back of the stylus off. You should now be able to see the old cantilever. Use the needle-nose pliers to gently remove the old cantilever from its mount.
Step 3: Insert the New Cantilever
Now it’s time to insert the new cantilever. Take the new cantilever and insert it into its mount. Make sure that it’s securely in place. Once you’re sure that the cantilever is secure, use the small flat-head screwdriver to tighten the screws. Make sure that the screws are tight, but not too tight.
Step 4: Test the Stylus
Once you’ve finished tightening the screws, it’s time to test the stylus. Plug it into your device and test it out. Make sure that it’s working properly and that there are no issues. If everything is working properly, you can proceed to the next step.
Step 5: Clean the Stylus
Now that the new cantilever is installed, it’s time to clean the stylus. Use a soft, lint-free cloth to wipe down the stylus. Make sure that you get into all of the nooks and crannies. Once you’ve finished cleaning the stylus, you can put the back cover back on.
Step 6: Reattach the Back Cover
Take the back cover and place it back on the stylus. Make sure that it’s properly aligned and that the screws line up. Once you’re sure that the back cover is secure, you can use the Phillips screwdriver to tighten the screws. Make sure that the screws are tight, but not too tight. Once you’ve finished tightening the screws, you’re done.
Conclusion
Replacing the cantilever on a stylus may seem like a daunting task, but it’s actually quite simple. As long as you have the right tools and you follow the steps outlined in this article, you should be able to replace the cantilever on your stylus quickly and easily. So, don’t be afraid to tackle this job. With a little bit of patience, you can have your stylus working like new again in no time.